 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
RIPPER LIFT CYLINDER REPLACEMENT - CONTINUED
0163 00
REMOVAL - CONTINUED
8
6
7
10
9
5
386-819
11
12
13,14,15
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.
NOTE
Ripper lift cylinder weighs 206 lb (93 kg).
Connecting link weighs 227 lb (126 kg)
1.
Attach a nylon sling and a suitable lifting device to lift cylinder (6) and move oil lift cylinder into position at frame
assembly (12).
2.
Install pin assembly (15), plate (14) and two bolts (13).
3.
Lower lift cylinder (6) to wood block (5).
4.
Remove nylon sling and lifting device from lift cylinder (6).
5.
Attach nylon sling and lifting device to connecting link (7) and lift cylinder (6).
6.
Align hole in connecting link (7) with hole in lift cylinder (6) and install pin assembly (10), plate (9) and two bolts (8).
7.
Remove nylon sling and lifting device from connecting link (7) and cylinder (6).
8.
Remove wood blocks (11 and 5).
0163 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals