 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
HYDRAULIC SYSTEM LINES AND FITTINGS REPLACEMENT - CONTINUED
0160 00
REMOVAL - CONTINUED
7
9
10
8
11
12
13
14
3
1
6
2
5
16
17
15
18
19
21
20
24
4
23
17
22
386-821
INSTALLATION
CAUTION
Remove cap and/or plugs from tubes, hoses and openings and wipe tubes, hoses and fittings clean as con-
nections are made, to prevent contamination from entering hydraulic system.
NOTE
Lightly coat new O-rings with clean oil before installation.
1.
Tube or Hose Assembly Connected to Elbow.
a.
Route tube or hose assembly (22) along its proper path.
b.
Install new O-ring (24) and elbow (23).
c.
Use two wrenches to connect tube or hose assembly (22) to elbow (23).
d.
Repeat steps b and c for other end of tube or hose assembly (22).
e.
Install retaining straps (3), clips (2) and/or clamps (1) along entire length of tube or hose assembly (22) as follows:
(1)
Retaining strap. Install retaining strap (3), spacer (14), new lockwasher (13) and bolt (12).
(2)
Clip. Install clip (2), bolt (11), new lockwasher (10) and nut (9).
(3)
Clamp. Install clamp (1), washer (8), bolt (7), new lockwasher (6) and nut (5).
f.
Refill hydraulic tank and bleed air from system, if necessary (WP 0165 00).
g.
Check for proper operation and leaks (TM 5-2410-233-10).
0160 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals