 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE LIFT CYLINDER MOUNTING TUBE REPLACEMENT - CONTINUED
0159 00
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Blade lift cylinder mounting tube weighs approximately 426 lb (193 kg).
1.
Attach a nylon sling and a suitable lifting device to tube (2).
CAUTION
Use caution not to damage fan guard and radiator as tube is positioned at frame.
2.
Lift tube (2) into position on frame.
3.
Install two washers (7) and bolts (6) to underside of tube mounting at each end.
4.
Install two bolts (5), four washers (4) and two nuts (3) to each end of tube (2).
5.
If removed, install two grease fittings (8) to each end of tube (2).
6.
Apply GAA grease, as needed, to grease fittings (8) on tube (2).
7.
Install hydraulic lines (1) and fittings that are routed above tube (2).
8.
Install hood (WP 0136 00).
9.
Install blade lift cylinders (WP 0158 00).
END OF WORK PACKAGE
0159 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals