BLADE TILT ADJUSTABLE BRACE REPLACEMENT

TM 5-2410-233-23

BLADE TILT ADJUSTABLE BRACE REPLACEMENT

0156 00

THIS WORK PACKAGE COVERS

Removal, Cleaning, Installation and Adjustment

INITIAL SETUP

Tools and Special Tools

Materials/Parts - Continued

Rag, wiping (Item 28, WP 0184 00)

Tool kit, general mechanic's (Item 112, WP 0185 00)

Lockwasher (9)

Shop equipment, common no. 1 (Item 94, WP 0185

Pin, cotter (5)

Sling, nylon (Item 100, WP 0185 00)

Personnel Required

Lifting equipment, 200 lb capacity

Two

Materials/Parts

Equipment Condition

Cleaning compound, solvent (Item 4, WP 0184 00)

Machine parked on level ground (TM 5-2410-233-

10)

Grease, GAA (Item 15, WP 0184 00)

WARNING

Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-

cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of

heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death.

REMOVAL

Turn brace (1) using brace handle (2) so that brace

handle is centered in loop at rear of bulldozer blade

(3).

NOTE

Blade tilt adjustable brace

weighs

approximately 60 lb (27 kg).

Attach a nylon sling and suitable lifting device to rear

of brace (1) near rod (4). Take up slack.

386-621