 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
BLADE TILT CYLINDER REPLACEMENT - CONTINUED
0154 00
REMOVAL - CONTINUED
1.
Remove four capscrews (1), lockwashers (2) and hose
1,2
4
5
3
guard (3) from tilt cylinder (4) on left side of machine.
Discard lockwashers.
2.
Tag two hydraulic hoses (5).
3.
Remove four capscrews (6), flatwashers (7), two
flanges (8), O-ring (9) and one hydraulic hose (5).
Discard O-ring.
4.
Repeat step 3 for other hydraulic hose (5).
386-802
8
5
6,7
9 (HIDDEN)
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear
of heavy parts supported only by lifting device. Failure to follow this warning may result in injury or death
to personnel.
NOTE
Tilt cylinder weighs 418 lb (190 kg).
5.
Attach a nylon sling and a suitable lifting device to
center of tilt cylinder (4).
4
386-583
0154 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals