 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
WINCH GEAR PUMP REPLACEMENT - CONTINUED
0147 00
REMOVAL
1.
Remove two hose clamps (1) and disconnect suction hose (2) from connector (3).
2.
Disconnect oil pressure line (4) from connector (5) and remove connector from pump (6). Discard O-ring.
3.
Remove two capscrews (7), lockwashers (8) and remove pump (6) and gasket (9) from mounting bracket (10). Discard
lockwashers and gasket.
5
7,8 FRONT OF TRACTOR
4
10
9 (HIDDEN)
2
386-054
6
1
7,8
3
NOTE
Perform steps 4 through 6 only if winch pump mounting bracket requires replacement.
4.
Remove six capscrews (11), lockwashers (12) from mounting bracket (10). Discard lockwashers.
5.
Remove mounting bracket (10) and gasket (13) from auxiliary drive cover. Discard gasket.
6.
Remove setscrew (14), snap ring (15) and coupling
(16) from engine auxiliary drive gear shaft.
16
15
11
12
10
13
14
386-056
0147 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals