 |
|||
|
|
|||
|
Page Title:
Table 1. Track Shoe Dimensions. |
|
||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK ASSEMBLY INSPECTION AND ADJUSTMENT - CONTINUED
0120 00
INSPECTION - CONTINUED
Table 1. Track Shoe Dimensions.
SHOE
GROUSER DIMENSIONS (NEW)
GROUSER HEIGHT WEAR
Shoe Type
A (Thickness)
B (Width)
C (Height)
80%
100%
120%
Standard Single Grouser
0.56 in.
1.04 in.
2.76 in.
1.36 in.
1.00 in.
0.64 in.
(14 mm)
(26 mm)
(7 cm)
(3.4 cm)
(25 mm)
(16 mm)
Extended Service Grouser
0.66 in.
1.32 in.
2.81 in.
1.77 in.
1.5 in.
1.26 in.
(17 mm)
(34 mm)
( 7.1 cm)
(4.5 cm)
(3.8 cm)
(3.2 cm)
2.
Track Chain.
NOTE
Tractor uses a sealed, lubricated track chain which means there is virtually no wear on track pins as long as
seals retain lubricating oil in bushing.
a.
Measure link rail height (dimension D) and refer
to Table 2. Replace track assembly as necessary
NOTE
D
Check for "dry" track pin and bushing joints
by feeling bushings or link pin bosses for higher
temperatures compared to other joints of chain.
b.
Measure bushing external diameter (dimension
E) and refer to Table 2. If bushings are between
80 and 100% worn dimension, replace track
assembly (WP 0119 00).
E
386-152
Track Chain Dimensions.
MEASUREMENT
NEW
80%
100%
120%
Chain Link Rail Height D
4.94 in.
4.62 in.
4.50 in.
4.30 in.
(12.5 cm)
(11.7 cm)
(11.4 cm)
(11 cm)
Chain Bushing External Diameter E
2.94 in. (7.4 cm) 2.80 in. (7.1 cm) 2.74 in. (6.9 cm) 2.67 in. (6.8 cm)
0120 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals