 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK IDLER YOKE REPLACEMENT - CONTINUED
0116 00
INSTALLATION - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Yoke weighs 110 lb (50 kg).
3.
Use a nylon sling and a suitable lifting device to lift
9
8
yoke (8) into position on track roller frame (5) and
lower yoke over plates (10) and springs (11).
4.
Push yoke (8) onto end of rod (9).
NOTE
5
386-270
Apply antiseize compound to all bolts before
installation.
5.
Install plate (7) and two bolts (6) over end of rod (9).
6.
Install guard (4) on track roller frame (5) with five washers (2), new lockwashers (3) and bolts (1).
6
7
4
7
386-265
386-266
5
1,2,3
0116 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals