 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRACK IDLER REPLACEMENT - CONTINUED
0115 00
REMOVAL - CONTINUED
3.
Remove two capscrews (12) and lockwashers (13) from bearing (14) and yoke (15) on both sides of idler (5). Discard
lockwashers.
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during pro-
cedure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Idler weighs 500 lb (227 kg).
4.
Attach a nylon sling and a suitable lifting device to each side of idler (5) and support.
NOTE
Keep shims together with their respective collar for assembly.
5.
Remove two capscrews (16), lockwashers (17) and shims (18) at top of collar assembly (19) at end of yoke (15), on both
sides of idler (5). Discard lockwashers.
6.
Move idler (5) forward until collar assembly (19) clears end of track roller frame (20).
7.
Remove idler (5).
18 19
5
5
16,17
15
12,13
386-217
19
20
21
386-216
0115 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals