 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION OIL PUMP REPLACEMENT - CONTINUED
0095 00
REMOVAL - CONTINUED
CAUTION
Wipe area clean around all hydraulic connections to be opened during removal. Cap lines and plug open-
ings after removing lines. Contamination of transmission could result in premature failure.
NOTE
12(HIDDEN)
11
Use a suitable container to capture any residual
oil in lines. Dispose of oil IAW local policy and
ordinances. Ensure all spills are cleaned up.
9,10
2.
Remove four capscrews (5) and flatwashers (6) from
8
two tubes (7) and pump (8).
3.
Remove two capscrews (9) and flatwashers (10) from
pump (8).
4.
Remove pump (8) from flywheel housing (11).
Remove O-ring (12) and two O-rings (13). Discard O-
rings.
5,6
13
(HIDDEN)
386-791
13 (HIDDEN)
7
INSTALLATION
NOTE
Ensure all mating surfaces on pump and flywheel housing are clean and dry before installa-
tion.
Ensure splines on drive gear of oil pump are free of burrs.
Lightly coat new O-rings with clean oil before installation.
1.
Position two new O-rings (13) and new O-ring (12).
NOTE
Mesh splines on drive gear of oil pump with flywheel teeth. Ensure they mesh together smoothly.
2.
Install pump (8) on flywheel housing (11) with two flatwashers (10) and capscrews (9).
3.
Secure two tubes (7) to pump (8) with four flatwashers (6) and capscrews (5).
0095 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals