 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION CONTROL VALVES REPLACEMENT - CONTINUED
0094 00
REMOVAL - CONTINUED
34
33
10.
Remove sleeve (30) from transmission. Remove two
30
O-rings (31) from sleeve. Discard O-rings.
11.
Remove two O-rings (32) and discard.
12.
Remove three sleeves (33). Remove two O-rings (34)
from each sleeve. Discard O-rings.
31
32
386-391
INSTALLATION
CAUTION
Ensure all components are clean prior to installation. Perform installation in a clean work environment.
Contamination of transmission could result in premature failure.
NOTE
Lightly coat all components with clean oil before installation.
1.
Install two new O-rings (34) onto each sleeve (33). Install three sleeves into transmission.
2.
Install two new O-rings (32).
3.
Install two new O-rings (31) onto sleeve (30). Install sleeve in transmission.
4.
Position selector valve (27) in transmission. Ensure that sleeves (30 and 33) align with holes in selector valve and that
links on ends of valve spools are in position on control levers.
5.
Secure selector valve (27) with three washers (29) and capscrews (28). Tighten capscrews to 35 lb-ft (47 Nm).
6.
Install four new O-rings (25 and 26) into top of selector valve (27).
0094 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals