 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
TRANSMISSION OIL LINES REPLACEMENT - CONTINUED
0088 00
INSTALLATION
CAUTION
Remove caps and/or plugs from lines and openings and wipe lines and fittings clean as connections are
made, to prevent contamination from entering transmission.
1.
Route line (6 or 11) along its proper path.
2.
If installing a line (11) that connects to a connector (12), connect line to connector at each end of line.
NOTE
Lightly coat new O-rings with clean oil before installation.
3.
If installing a line (6) with a single or split flanged mounting, install new O-ring (10) to each end of line.
4.
Install each end of line (6) with flange(s) (9), four washers (8) and capscrews (7).
NOTE
Hose clamp mounting hardware differs depending on location of clamp.
5.
Install hose clamps (5), in their original location, to secure line (6 or 11). Secure hose clamps with capscrews (4),
washers (3) new lockwashers (2) and nuts (1).
6.
Add oil to transmission as required (WP 0086 00).
7.
Operate machine and check for leaks (TM 5-2410-233-10).
8.
Install floor plates (WP 0135 00).
END OF WORK PACKAGE
0088 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals