SUCTION SCREEN CLEANING AND INSPECTION

TM 5-2410-233-23

TRANSMISSION MAGNETIC STRAINER ASSEMBLY AND TORQUE

DIVIDER SUCTION SCREEN MAINTENANCE - CONTINUED

0085 00

SUCTION SCREEN CLEANING AND INSPECTION

WARNING

Solvent cleaning compound MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-

rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-venti-

lated areas. Keep away from open flames and other sources of ignition.

Clean suction screen in solvent cleaning compound IAW WP 0176 00.

Inspect suction screen for damage IAW WP 0176 00.

Replace any damaged component.

SUCTION SCREEN INSTALLATION

Install new gasket (18) on cover (12).

Assemble spacer (16) and suction screen (15) onto stud (17). Install with new self-locking nut (14).

NOTE

Ensure bolts are installed in same locations from which they were removed.

Install cover (12) with assembled parts on underside of flywheel housing (13) with six new lockwashers (11) and bolts

(10).

Apply sealing compound to threads of drain plug (9). Install plug and tighten.

Check level of oil in transmission and add as needed (WP 0086 00).

Start engine and check for leaks (TM 5-2410-233-10).

Close crankcase guard (WP 0129 00).

END OF WORK PACKAGE

0085 00-6