 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
ETHER STARTING AID MAINTENANCE - CONTINUED
0057 00
REMOVAL - CONTINUED
14.
Remove four nuts (29), washers (30) capscrews (31) and remove two clamp assemblies (4).
15.
Remove two nuts (32), washers (33) and capscrews (34).
16.
Remove capscrew (35), flatwasher (36) and bracket (37).
17.
Remove two capscrews (38), washers (39), box assembly (40) and spacers (41) from cylinder head.
18.
Remove cotter pin (42), washer (43), thumbscrew (1) and washer (44). Discard cotter pin.
38
35
32
33
36
39
29
30
37
31
4
1
44
34
43
42
40
41
386-275
INSTALLATION
1.
Install thumbscrew (1), washer (44), washer (43) and new cotter pin (42).
2.
Position box assembly (40) and spacers (41) on cylinder head and install two washers (39) and capscrews (38).
3.
Install bracket (37) with capscrew (35), flatwasher (36), two washers (33), capscrews (34) and nuts (32).
4.
Install two clamp assemblies (4), four capscrews (31), washers (30) and nuts (29).
5.
Install grommet (28).
6.
Thread valve wires through grommet and install valve (5), two capscrews (19), washers (18) and nuts (17).
7.
Place wire assembly (11) in position and connect connectors (12 and 13).
8.
Connect connector (25) to wiring harness.
9.
Place clamp (27) around wire assembly (11) and install capscrew (26).
10.
Place wire assembly (14) in position and connect connectors (15 and 16).
11.
Install temperature switch (22).
12.
Attach wire assembly (14), screw (20) and washer (21) to temperature switch (22).
13.
Place clamp (24) around wire assembly (14) and install capscrew (23).
0057 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals