 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-23
VALVE MECHANISM MAINTENANCE - CONTINUED
0017 00
REMOVAL - CONTINUED
NOTE
Tag push rods as they are removed to ensure push rods are installed in the same location.
4.
Remove 12 push rods (10) from cylinder head (9) and block assembly (11).
9
11
10
7
20
19
14
21
6
22
18
8
5
15
16
13
17
12
DISASSEMBLY
NOTE
Tag and identify all parts during disassembly and note order of sequence when removing each part.
1.
Remove and discard O-ring (12) from rear support bracket (5).
2.
Remove retaining ring (13), two spring tension washers (14), washer (15) and intake rocker arm (16) from rear of rocker
shaft (8).
3.
Remove pin (17) and rear support bracket (5) from rear of rocker shaft (8). Discard pin.
4.
Remove two plugs (18) from each end of rocker shaft (8). Discard plugs.
NOTE
Smaller rocker arms are intake and larger rocker arms are exhaust.
5.
Remove dowel pin (19) and eye bracket (7) from front of rocker shaft (8).
6.
Remove five springs (20), twelve washers (21), angle bracket (6), six exhaust rocker arms (22) and five intake rocker
arms (16) from rocker shaft (8).
0017 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals