 |
|||
|
|
|||
|
Page Title:
Engine Cranks But Will Not Start in Cold Weather (Fuel System Operating Properly). - Continued |
|
||
| ||||||||||
|
|
 TM 5-2410-233-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 6. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
c. Connect meter positive
14. Engine Cranks But Will Not Start in Cold
lead to purple disconnected
Weather (Fuel System Operating Properly) -
wire and meter negative
Continued.
lead to chassis ground.
press If voltage is indicated, replace
d. Crank
engine,
starting aid button and starting aid valve (WP 0057 00).
observe meter.
6. Test starting aid wire for
continuity.
a. Place battery disconnect
switch in OFF position.
b. Disconnect wire between
starting aid switch and
starting aid valve at both
ends.
c. Set
to
appropriate ohm (Ω) range.
d. Connect meter positive 1. If continuity is indicated,
replace starting aid switch (WP
lead to one end of wire.
Connect meter negative
lead to other end of wire.
2. If continuity is not indicated,
repair open circuit in wire (WP
0006 00-57
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals