 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-2410-233-10
TRACK ADJUSTMENT - CONTINUED
0015 00
ADJUSTMENT - CONTINUED
TRACK IDLER
IDLER
BEARING
SUPPORT
1/2 IN. (12.7 MM)
386-716
TRACK ROLLER
FRAME
10. Put a drawbar pin (or a length of steel pipe) between top of track sprocket teeth near track link.
PIN
SPROCKET
386-251
11. Start engine and move machine in reverse until rear face of idler bearing support moves past mark made on track roller
frame (WP 0005 00).
12. Move machine forward until pin is free of sprocket. Shut down engine and remove pin (WP 0005 00).
13. Connect grease gun to fill valve. Close relief valve.
14. Pump grease into fill valve until rear face of idler bearing support lines up with mark made on track roller frame.
15. Close recoil mechanism access cover and tighten bolt.
16. Operate machine and check track for proper operation (WP 0005 00).
END OF WORK PACKAGE
0015 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals