Click here to make tpub.com your Home Page

Page Title: Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for D7F Tractor - Continued.
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 5-2410-233-10
OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0012 00
Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for D7F Tractor - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
44
Weekly
0.3 Hours Batteries
WARNING
To avoid injury, eye protection and acid-resistant gloves must be
worn when working around batteries. Do not smoke, use open
flame, make sparks or create other ignition sources around
batteries. If a battery is giving off gases, it can explode and
cause injury to personnel. Remove all jewelry such as rings, ID
tags, watches, and bracelets. If jewelry or a tool contacts a
battery terminal, a direct short will result in instant heating,
damage to equipment, and injury to personnel.
Sulfuric acid contained in batteries can cause serious burns. If
battery corrosion or electrolyte makes contact with skin, eyes or
clothing, take immediate action to stop the corrosive burning
effects. Failure to follow these procedures may result in injury
or death.
NOTE
For complete information on servicing batteries, refer to TM 9-
6140-200-14.
a. Release two latches and open battery One or both batteries are
box access cover on left side of missing.
tractor.
b. Inspect batteries for obvious damage Any electrolyte leakage is
such  as  a  cracked  case  and evident.
electrolyte leakage.
c. Check  battery  hold-down  for Hold-down is damaged or
looseness and damage. If loose, loose.
tighten wingnuts.
d. Check batteries for broken and Broken
and
corroded
corroded connections or frayed/ connections
or
frayed/
burned/melted cables and clamps.
burned/melted  cables  and
clamps are evident.
e. Remove  fill  plugs  and  check
electrolyte level in cells of both
batteries. Level should be 1/8 in. (3
mm) above tops of plates. Add
distilled water as needed to maintain
correct level.
0012 00-28

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business