Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for D7F Tractor - Continued.

TM 5-2410-233-10

OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED

0012 00

Table 1. Operator Preventive Maintenance Checks and Services (PMCS) for D7F Tractor - Continued.

LOCATION

ITEM TO

ITEM

MAN-

CHECK/

NOT FULLY MISSION

NO.

INTERVAL

HOURS

SERVICE

PROCEDURE

CAPABLE IF:

During

Overall

a. Be alert for evidence of fluid leaks Class III leaks are evident.

Machine

such as oil, coolant or fuel.

b. Be alert for proper operation of

steering brakes and power train

components.

c. Be alert for proper operation of

implement controls.

FRONT

AND LEFT

SIDE

NOTE

Ensure tractor is parked on level ground with transmission in

neutral (N), transmission safety lock lever in locked position,

brake lock lever engaged and implements lowered to ground.

Leave engine running for transmission and engine HOT oil

level checks, and until track inspection has been performed.

After

0.2 Hours Transmission Check level of oil in transmission with

Oil Level

engine running at low idle speed and

transmission warm:

a. Tilt operator seat forward to access

transmission dipstick and filler tube

under seat.

b. Wipe area clean around dipstick and

oil filler tube and cap.

c. Remove dipstick, wipe clean, then

reinstall. Remove dipstick and check

level on dipstick. Maintain level at

FULL line on dipstick.

d. If level is low, use square key (Item

3, WP 0017 00) and adjustable

wrench (Item 5, WP 0017 00) to

remove filler cap. Add lubricating

oil (Item 8, 9, 10 or 11, WP 0019 00)

until level indicated on dipstick is at

FULL line. Refer to KEY at end of

WP 0011 00 for correct grade of oil

for expected temperature range.

0012 00-12