CONTENTS OF THIS MANUAL

TM 5-2410-233-10

CONTENTS OF THIS MANUAL - CONTINUED

Chapter 4 deals with Operator Maintenance. Major areas covered are Preventive Maintenance Checks and Services

(PMCS) and operator level maintenance tasks.

Chapter 5 includes Supporting Information: References, Components of End Item (COEI) and Basic Issue Items (BII)

Lists, Additional Authorization List (AAL), Expendable and Durable Items List, and Warranty Information.

FEATURES OF THIS MANUAL

WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in BOLD print as a

visual aid.

WARNING

A WARNING indicates a hazard which may result in injury or death.

CAUTION

A CAUTION is a reminder of safety practices or directs attention to usage practices that may result in

damage to equipment.

NOTE

A NOTE is a statement containing information that will make the procedures easier to perform.

Statements and words of particular interest may be printed in CAPITAL LETTERS to create emphasis.

Within a procedural step, reference may be made to another work package in this manual or to another manual. These

references indicate where you should look for more complete information.

If you are told: "Refuel tractor (WP 0013 00)", go to WP 0013 00 in this manual for instructions on refueling.

If you are told: "For complete information on servicing batteries, refer to TM 9-6140-200-14", go to the

References work package (WP 0016 00) for complete information.

Illustrations are placed after, and as close to, the procedural steps to which they apply. Callouts placed on the art are text or

numbers.

Numbers located at lower right corner of art (e.g. 386-001; 386-002, etc.) are art control numbers and are used for tracking

purposes only.

Dashed leader lines used in the Lubrication Chart (WP 0011 00) and in the PMCS Table (WP 0012 00) indicate that called

out lubrication points are located on both sides of the machine.

Technical instructions include metric units as well as standard units. For your reference, a Metric Conversion Chart is

located on the inside back cover of the manual.