Recoverability Code.

TM 5-2410-223-24P

H-

General support is the lowest level that can

d. PART NUMBER (Column (4)). Indicates the

do complete repair of the item.

primary number used by the manufacturer (individual,

company, firm, corporation, or Government activity),

L-

Specialized repair activity is the lowest level

which controls the design and characteristics of the item

that can do complete repair of the item.

by means of its engineering drawings, specifications

standards, and inspection requirements to identify an

D-

Depot is the lowest level that can do com-

item or range of items.

plete repair of the item.

NOTE: When you use an NSN to requisition an item, the

Z-

Nonreparable. No repair is authorized.

item you receive may have a different part number from

the part ordered.

B-

No repair is authorized. (No parts or special

tools are authorized for the maintenance of a

e. DESCRIPTION AND USABLE ON CODE (UOC)

"B''-coded item,) However, the item maybe

(Column (5)). This column includes the following

reconditioned by adjusting, lubricating, etc.,

information:

at the user level.

(1) The Federal item name and, when required,

a minimum description to identify the item.

(3) Recoverability Code. Recoverability codes

are assigned to items to indicate the disposition action

(2) Physical security classification. Not Appli-

on unserviceable items. The recoverability code is en-

cable.

tered in the fifth position of the SMR code as follows:

(3) Items that are included in kits and sets are

listed below the name of the kit or set on Figure KIT.

AppIication/Explanation

Code

(4) Spare/repair parts that make up an assem-

Z-

Nonreparable item. When unserviceable,

bled item are listed immediately following the

condemn and dispose of the item at the Ievel

assembled item line entry.

of maintenance shown in the 3d position of

the SMR code.

(5) Part numbers for bulk materials are refer-

enced in this column in the line item entry for the item to

Reparable item. When uneconomically

O-

be manufactured/fabricated.

reparable, condemn and dispose of the item

at unit maintenance or aviation unit level.

(6) When the item is not used with all serial numb-

ers of the same model, the effective serial numbers are

F-

Reparable item. When uneconomically

shown on the last line(s) of the description (before

reparable, condemn and dispose of the item

UOC). Not Applicable.

at the direct support or aviation intermediate

(7) The usable on code, when applicable (see

level.

paragraph 5, Special Information).

H-

Reparable item. When uneconomically

(8) In the Special Tools List section, the basis of

reparable, condemn and dispose of the item

issue (BOI) appears as the last line(s) in the entry for

at the general support level.

each special tool, special TMDE, and other special sup-

D-

Reparable item. When beyond lower Ievel

port equipment. When density of equipments supported

repair capability, return to depot. Condem-

exceeds density spread indicated in the basis of issue,

nation and disposal of item not authorized

the total authorization is increased proportionately.

below depot Ievel.

(9) The statement "END OF FIGURE" appears

just below the last item description in Column 5 for a

L-

Reparable item. Condemnation and dis-

given figure in both Section II and Section Ill.

posal of item not authorized below

specialized repair activity (SRA).

f. QTY (Column (6)). The QTY (quantity per figure

column) indicates the quantity of the item used in the

A-

Item requires special handling or condem-

breakout shown on the illustration/figure, which is

nation procedures because of specific

prepared for a functional group, subfunctional group, or

reasons (e. g., precious metal content, high

an assembly. A "V" appearing in this column in lieu of a

dollar value, critical material, or hazardous

quantity indicates that the quantity is variable and the

material). Refer to appropriate manuals/di-

quantity may vary from application to application.

rectives for specific instructions.

4. Explanation of Columns (Section IV).

c. CAGEC (Column (3)). The Commercial and

Government Entity (CAGE) Code (C) is a 5-digit

a. NATIONAL STOCK NUMBER (NSN) INDEX.

alphanumeric code which is used to identify the

manufacturer, distributor, or Government agency, etc.,

(1) STOCK NUMBER column. This column lists

that supplies the item.

the NSN by National Item Identification Number (NIIN)