|
|
TM 5-2410-223-24P
Installation drawing, diagram, instruction
XC -
Application/Explanation
Code
sheet, field service drawing, that is identified
PA
Stocked items; use the applicable NSN to
by the manufacturer's part number.
request/requisition items with these source
PB
Item is not stocked. Order an "XD''-coded
XD -
codes. They are authorized to the category
PC**
item through normal supply channels using
indicated by the code entered in the 3d
PD
the CAGE and part number given, if no NSN
position of the SMR code.
is available.
PE
PF
NOTE: Cannibalization or controlled exchange, when
** Items coded
PC
are
subject
to
PG
authorized, may be used as a source of supply for items
with the above source codes, except for those source
coded "XA" or those aircraft support items restricted by
Items with these codes are not to be
requirements of AR 700-42.
requested/requisitioned individually. They
KD
are part of a kit which is authorized to the
(2) Maintenance Code. Maintenance codes tell
KF
maintenance category indicated in the 3d
you the level(s) of maintenance authorized to USE and
KB
position of the SMR code. The complete kit
REPAIR support items. The maintenance codes are en-
must be requisitioned and applied.
tered in the third and fourth positions of the SMR code as
follows:
Items with these codes are not to
MO-(Made at UM/
(a) The maintenance code entered in the
be requested/requisitioned
AVUM Level)
third position tells you the lowest maintenance level
individually. They must be made
MF-(Made at DS/
authorized to remove, replace, and use an item. The
from bulk material which is
AVUM Level)
maintenance code entered in the third position will indi-
identified by the part number in
MH-(Made at GS
cate authorization to one of the following levels of
the DESCRIPTION AND USABLE
Level)
maintenance.
ON CODE (UOC) column and
ML-(Made at Spe-
listed in the Bulk Material group
Application/Explanation
Code
cialized Repair
of the repair parts list in this
Activity (SRA))
C-
Crew or operator maintenance done within
RPSTL. If the item is authorized
unit maintenance or aviation unit mainte-
MD-(Made at
to you by the 3d position code of
nance.
Depot)
the SMR code, but the source
code indicates it is made at a
Unit maintenance or aviation unit category
O-
higher level, order the item from
can remove, replace, and use the item.
the higher level of maintenance.
Direct support or aviation intermediate level
F-
can remove, replace, and use the item.
Items with these codes are not to
be requested/requisitioned
H-
General support level can remove, replace,
and use the item.
individually. The parts that make
AO-(Assembled by
up the assembled item must be
UM/ AVUM
L-
Specialized repair activity can remove, re-
requisitioned or fabricated and
Level)
place, and use the item.
assembled at the level of
AF-(Assembled by
Depot level can remove, replace, and use
D-
maintenance indicted by the
DS/AVIM
the item.
source code. If the 3d position
Level)
code of the SMR code
(b) The maintenance code entered in the
AH-(Assembled by
authorizes you to replace the
fourth position tells whether or not the item is to be re-
GS Category)
item, but the source code
paired and identifies the lowest maintenance level with
AL-(Assembled by
indicates the item is assembled
the capability to do complete repair (i.e., perform all
SRA)
at a higher level, order the item
authorized repair functions). (NOTE: Some limited re-
AD-(Assembled by
from the higher level of
pair may be done on the item at a lower level of
Depot)
maintenance.
maintenance, if authorized by the Maintenance Alloca-
tion Chart (MAC) and SMR codes.) This position will
contain one of the following maintenance codes:
Application/Explanation
Code
Do not requisition an "XA''-coded item. Or-
XA-
Unit maintenance or aviation unit is the low-
O-
der its next higher assembly. (Also refer to
est level that can do complete repair of the
the NOTE following.)
item.
Direct support or aviation intermediate is the
F-
If an "XB" item is not available from salvage,
XB-
lowest level than can do complete repair of
order it using the CAGE and part number
the item.
given.
2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |