 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 10-3930-633-34
stallation procedures on the front axle and
(1) Clean the spring assembly using solvent,
Federal Specification P-D-680 and a stiff wire
springs.
(2) Adjust front wheel bearings in accordance
brush.
(2) Inspect bushings in the spring eyes for
with procedures outlined in TM 10-3930-633.12.
wear or deterioration. Replace as required.
(3) Lubricate axle assembly as indicated in
LO 10-3930-633-12,
(3) Check for loose center bolt or rebound
(4) Adjust steering stop screws as outlined in
clips and tighten as necessary,
TM 10-3930-633-12.
(4) Check for broken or distorted leaves, and
replace spring assembly if any leaf is bent or
12-3. Front Springs
broken.
procedures covering removal of front axle and
for procedures covering installation of springs
springs.
and axle.
b. Cleaning and Inspection.
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals