Section V. PREVENTIVE MAINTENANCE CHECKS AND SERVICES

TM 10-3930-633-12

(5) Install the transmission fluid filter and clip.

Install the oil pan, using a new gasket,

b. Filter Replacement.

(1) The filter is a throw-away element type,

mounted to a bracket on the right side of the engine

compartment.

(2) Unscrew and discard the old element.

(3) Fill the new element with clean fluid.

Make sure the rubber sealing ring is in place and

screw the new cartridge on the adapter until it just

makes contact, then tighten turn farther.

c. Transmission Refill.

(1) Refill the transmission with 8 quarts of

transmission fluid, Type "F" (Ford Motor Co.

Specification M2C-33F or equivalent).

(2) Start the engine and allow transmission to

warm up thoroughly, then check fluid level on

transmission dipstick. Add sufficient fluid to bring

l e v e l to FULL mark on dipstick. Complete

transmission refill, including converter, requires 11

quarts of fluid.

Figure 4-1.2. Transmission Oil Filter

Section V. PREVENTIVE MAINTENANCE CHECKS AND SERVICES

(MONTHLY AND QUARTERLY)

4-14. General

shortcomings, together with the corrective action

taken, will be noted on DA Form 2404 (Equipment

Preventive Maintenance Checks and Services to be

Inspection and Maintenance Worksheet) at the

performed at monthly or quarterly intervals are

d e t a i l e d in table 4-1. All deficiencies and

earliest opportunity.

Change 1