CHAPTER 3 OPERATOR'S MAINTENANCE INSTRUCTIONS

TM 10-3930-633-12

CHAPTER 3

OPERATOR'S MAINTENANCE INSTRUCTIONS

Section I. LUBRICATION INSTRUCTIONS

points after lubrication to prevent accumulation

3-1. Lubrication

of foreign matter.

a. Refer to Lubrication Order LO 10-3930-633-

c. Points o f L u b r i c a t i o n . Service the

12 for all lubrication procedures authorized at

lubrication points at proper intervals as

organizational level. Supplementary instructions

illustrated in the lubrication order.

to the Lubrication Order are contained in the

following paragraphs.

3-3. Engine Crankcase Oil and Filter Change

b. Use only, the lubricants specified in the

Paragraph 3-3 and Figure 3-1 have been rescinded.

lubrication order, Carefully follow instructions

given on the lubrication order to assure proper

3-4. Transmission Oil Change

operation of the equipment.

Paragraph 3-4 has been rescinded.

3-2. Detailed Lubrication Information

a. General. Keep all lubricants in closed

containers and store in a clean, dry place away

from external heat. Allow no dust, dirt, or other

foreign material to mix with the lubricants. Keep

all lubrication equipment clean and ready for use.

b. Cleaning. Keep all external parts not

requiring lubrication clean of lubricants. Before

. lubricating the. equipment, wipe all lubrication

points free of dirt and grease. Clean all lubrication

Change 1

3-1