Section II. (To be filled in by Support Activity).

TB 9-2300-295-15/20

*An asterisk denotes code numbers not listed in Block 15, DA Form 2407. When selecting one of

these codes, the appropriate code must be entered in the space designated "OTHER", Block 15.

(s) Block 16. Enter "Warranty Claim Action", and give complete description of

failure.

(t) Block 23. Enter the authorization signature and the Julian date in the block. Check

your local SOP.

(2) Section II. (To be filled in by Support Activity). Fill in Section II using the steps

below.

NOTE

If work was accomplished by AM General Corporation or its designated represent-

ative, copy the information from the invoice; attach it and Copy 4 of the Work

Order to this form.

(a) Block 17. Fill in name and address of the facility which made the repair.

(b) Block 18 and 19. Leave blank.

- Columns a and b. Leave blank.

Column d. Enter name of the part or assembly.

Column e. Enter serial number of the part or assembly. If there is no serial

number, leave blank.

Column f. Leave blank.

- Column g. Enter number of man-hours needed to replace the defective part(s).

Record the actual number of man-hours needed to complete the job including the time needed to

disassemble/reassemble a larger item to remove/replace the defective part(s).

Column h. Enter NSN of the defective part(s), if known. Otherwise, enter the

manufacturer's part number.

Column i through n. Fill in as indicated.

(3) Section Ill. (To be filled in by the unit that forwards DA Form 2407 to the NMP).

Fill in this section using the steps below.

(a) Block 30. Check the space provided for "ROUTINE".

(b) Block 31. Check the space for "OTHER".

(d) Block 33. Enter NSN of the defective part, if known. Otherwise enter the manu-

facturer's part number.

(e) Block 34. Enter name of the defective part.