(11) Install two 12357130 supports and two existing clamp assemblies to two existing supports
and secure with four MS90725-64 screws, MS27183-14 washers, and MS51943-5 nuts as shown in figure 6.
Tighten nuts finger tight.
(12) Install two screws, clamps, washers (removed in step 9), and MS51943-5 nuts as shown in
figure 6. Tighten nuts finger tight.
(13) Secure nuts installled in steps 11 and 12.
b. Air Lines and Tank Installation.
When installing the air tank on the supports, ensure it is positioned as
shown in figure 7.