Table 1. End Items or Systems to be Modified

MWO 5-2410-236-20-1

1. Purpose. The purpose of this modification is to replace the wire rope assembly on the D5B Series tractors with

a higher rated capacity wire rope assembly.

2. Priority. This modification is classified URGENT.

a. EQUlPMENT IN USE. (including equipment in supply or maintenance activities below depot level and equip-

ment in administrative storage). Equipment in use will be modified as soon as practicable, but no later than the

scheduled completion date. Equipment not modified after expiration of MWO completion date will be reported as

Non-Mission Capable Materiel (NMCM) in accordance with applicable Army regulations.

b. EQUIPMENT IN WHOLESALE DEPOT SUPPLY OR MAINTENANCE ACTIVITIES. All MWOs to include

MWOs which have been incorporated into DMWRs, will be accomplished on serviceable materiel prior to issue

and/or subsequent to scheduled completion date. Operational Project Stock stored at the depots will be modified

concurrently with depot stock. Issue of unmodified materiel is prohibited. The MWO will be applied to unserviceable

materiel during scheduled depot maintenance.

c. PRE-POSITIONED STOCK. Equipment which is pre-positioned will be modified during cyclic maintenance

and will be consistent with DA PAM 738-750.

3. End Items or Systems to be Modified. See table 1.

Table 1. End Items or Systems to be Modified

Nomenclature

NSN

Part No.

CAGE

Serial No.

Full Tracked Tractor, D5BS

2410-01-127-6512

D5BS

11083

ALL

2410-01-126-7902

Full Tracked Tractor, D5BNS

D5B

11083

ALL

Full Tracked Tractor, D5BS1

2410-01-270-1192

5R8014

11083

ALL

Full Tracked Tractor, D5BNS1

2410-01-296-8479

5R5048

11083

ALL

4. Assembly to be Modified. Not applicable.

5. Parts to be Modified. Not applicable.

6. Application.

a. TIME COMPLIANCE SCHEDULE. The effective date of this MWO is 1 October 1995 and its completion

date is 1 June 1996.

b. LEVEL OF MAINTENANCE. Organizational maintenance is the lowest level of maintenance authorized

to perform this modification.

c. WORK FORCE AND MAN-HOUR REQUIREMENTS. See table 2