LOSS OF MIDDLE FRAME LOAD HOLDING. (Cont) -726250475

TM 9-2320-364-34-1

All personnel must stand clear during lifting operations. A swinging or shifting load may cause injury or

death to personnel.

OPERATION TEST

(1) Start engine (TM 9-2320-364-10).

(2) Position LHS hook to rear of truck

and engage hook on steel tube

supported by jackstands.

(3) Using LHS, lift truck only enough to lift

vehicle weight off suspension. Do not

lift tires off ground.

(3) Set hydraulic selector switch to

OFF position.

(4) Turn OFF ENGINE switch.

(a) If middle frame does not hold

weight off vehicle suspension,

perform Steps (5) through (8)

below and go to Step 6 of

this Fault.

(b) If middle frame does hold weight

off vehicle suspension, perform

Steps (5) through (8) below and

go to Step 2 of this Fault.

(5) Disengage hook from bar.

(6) Put LHS in transit position.

(7) Set hydraulic selector switch to

OFF position.

(8) Turn OFF ENGINE switch.