|
| |
TM 9-2320-360-34-1
b.
Disassembly
(1)
Place valve body (1) in vise.
NOTE
To aid in assembly, mark position of
elbows
on
valve
body
before
removal.
(2)
Remove two elbows (2) and preformed
packings (3) from valve body (1). Discard
preformed packings.
(3)
Remove
adapter
(4)
and
preformed
packing (5) from valve body (1). Discard
preformed packing.
(4)
Remove elbow (6) and preformed packing
(7)
from
valve
body
(1).
Discard
preformed packing.
(5)
Remove two cotter pins (8), linkplate (9),
doublepin (10), and handle (11) from
handle bracket (12).
(6)
Remove cotter pin (13) and pin (14) from
handle (11).
(7)
Remove two screws (15) and handle
bracket (12) from control valve body (1).
(8)
Remove retainer (16) and spool seal (17)
from control valve body (1).
c.
Cleaning/Inspection
Dry cleaning solvent P-D-680 Is toxic and flammable. Wear protective goggles and
gloves and use solvent only in a well-ventilated area. Avoid contact with skin,
eyes, and clothes, and don't breathe vapors. Do not use near open flame or
excessive heat. The flash point is 100 -138° F (38-59° C). If you become dizzy while
using cleaning solvent, get fresh air immediately and get medical aid. If solvent
contacts eyes, wash eyes with water and get medical aid immediately.
(1)
Clean all metal parts with dry cleaning solvent.
17-21
|
