 |
|||
|
|
|||
|
Page Title:
|
|
||
| ||||||||||
|
|
 TM 9-2320-312-24-1
COOLANT FILTER AND HOSES MAINTENANCE - CONTINUED
0024 00
FILTER HEAD REMOVAL
NOTE
Use a drain pan to catch residual coolant. Dispose of coolant in accordance with local policy and ordinances.
Ensure all spills are cleaned up.
1.
Remove filter element (10) from filter head (11) (Refer to Filter Element Removal).
NOTE
Tag coolant hoses to ensure correct installation.
2.
Loosen two hose clamps (1) and disconnect two hoses (3 and 4) from elbows (2).
3.
Remove two nuts (5), screws (6), and filter head (11) from mounting bracket (9).
4.
Remove two elbows (2) from filter head (11).
5.
If damaged, remove two screws (8), lockwashers (7), and mounting bracket (9) from right front of engine. Discard lock-
washers.
3
2
1
5,6
4
7
10
8
10
11
9
FILTER HEAD INSTALLATION
1.
If removed, install mounting bracket (9) to engine with two new lockwashers (7) and screws (8).
NOTE
Apply pipe sealing compound to male threads of fittings.
2.
Install two elbows (2) to filter head (11).
3.
Install filter head (11) to mounting bracket (9) with two screws (6) and nuts (5).
4.
Connect two hoses (3 and 4) to elbows (2) and tighten hose clamps (1).
5.
Install filter element (10) to filter head (11) (Refer to Filter Element Installation).
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals