|
| |
TM 5-2420-222-34
4-1.
CLUTCH ASSEMBLY MAINTENANCE (SERIAL NUMBERS 235786-235999) (Con’t).
9.
Install thrust ball bearing (7) in clutch throw carrier (9).
CAUTION
Use care when placing clutch throw carrier in vise. Ensure that thrust ball
bearing does not become clamped in vise jaws. Damage to thrust ball bearing
may result.
10. Position clutch throw carrier (9) in vise with caps. Using 2 lb ball-peen hammer, tap two hollow pins (8) into clutch
throw carrier, then remove from vise.
11. Position shifter fork (13) in place on clutch throw carrier (9).
e.
INSTALLATION
1.
Position clutch throw carrier (9) with attached thrust ball bearing (7) and shifter fork (13) in place on clutch support
bearing carrier (11) and manual control lever (12).
2.
Install two screws (10) in shifter fork (13) and manual control lever (12). Torque screws to 35 lb.-ft. (47 N•m).
TA701308
4-7
|
