Torque Converter Inlet Relief Valve

6-6.

Torque

Converter

Inlet

Relief

Valve

d. Inspection and Repair.

(1) Inspect the valve housing and valve for

a. General. The torque converter inlet relief

nicks, burrs, pitting and wear. Light scratches or a

v a l v e is an integral part of the directional valve

l i g h t grey wear appearance are not harmful to the

body assembly and is also located within the

valve. Examine the valve edges for wear. If wear or

t r a n s m i s s i o n case (fig. 6-32).

d a m a g e exists, replace valve assembly.

b. Removal. Refer to paragraph 6-4 and remove

the directional valve body assembly from trans-

( 2 ) Inspect inlet relief spring for damage and

proper tension. Replace a defective or weak spring.

mission case.

e. R e a s s e m b l y a n d I n s t a l l a t i o n : R e v e r s e

c. D i s a s s e m b l y . R e f e r

and

disassembly and removal procedure and assemble

d i s a s s e m b l e the inlet relief valve from directional

a n d install the torque converter inlet relief valve.

valve body.