Lamp(s) Will Not Light.

TM 5-2410-233-23

TROUBLESHOOTING PROCEDURES - CONTINUED

0006 00

Table 6. Electrical System Troubleshooting Procedures - Continued.

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

1. Check for blown fuse(s).

13. Lamp(s) Will Not Light.

a. Place battery disconnect

switch in OFF position.

b. Use multimeter to check 1. Replace blown fuse with a fuse

of the same rating.

for blown fuse in circuit

with no light.

2. If fuse(s) continue to blow,

check for short circuit (WP

0177 00). Refer to schematic

diagram.

15A

DASH

FUSE

LIGHT SWITCH

EXTERIOR

LIGHT SWITCH

15A FUSE (LOCATED IN CIRCUIT

DASH LAMP

BETWEEN LIGHT SWITCH AND

HEADLAMPS/REAR LAMP)

386-500

2. Check for defective lamp.

a. Place battery disconnect

switch in OFF position.

b. Replace lamp with one

known to be OK.