|
|
TM 9-2320-364-34-1
VERIFY REPAIR
(1) Check hydraulic oil level and add oil
as necessary (TM 9-2320-364-20).
(2) Lower boom using BOOM
control lever.
(a) If boom does not lower,
fault not corrected. Perform
Steps (3) through (5) below and
notify supervisor.
(b) If boom lowers, fault has been
corrected.
(3) Set crane POWER switch to
OFF position.
(4) Set hydraulic selector switch to OFF
position.
(5) Turn OFF ENGINE switch.
2-613
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |