|
|
TM 9-2320-364-34-1
VERIFY REPAIR
(1) Check hydraulic oil level and add oil
as necessary (TM 9-2320-364-20).
(2) Raise boom up using BOOM
control lever.
(a) If boom does not raise, fault not
corrected. Perform Steps (3)
through (5) below and notify
supervisor.
(b) If boom does raise, fault
has been corrected.
(3) Set crane POWER switch to
OFF position.
(4) Set hydraulic selector switch to OFF
position.
(5) Turn OFF ENGINE switch.
2-603
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |