|
|
TM 9-2320-364-34-1
VERIFY REPAIR
(1) Check hydraulic oil level and add
oil as necessary (TM 9-2320-364-20).
(2) Operate crane mast using MAST
control lever.
(a) If mast does not operate, fault
not corrected. Perform Steps (3)
through (5) below and notify
supervisor.
(b) If mast operates, fault has been
corrected.
(3) Set crane POWER switch to
OFF position.
(4) Set hydraulic selector switch to OFF
position.
(5) Turn OFF ENGINE switch.
2-501
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |