|
|
TM 9-2320-364-34-1
VERIFY REPAIR
(1) Start engine (TM 9-2320-364-10).
(2) Set WINCH/CRANE switch to
CRANE position.
(3) Set hydraulic selector switch to
CRANE/SRW position.
(4) Operate the four functions on
the four valve bank.
(a) If functions do not operate,
fault not corrected. Perform
Steps (5) through (7) below and
notify supervisor.
(b) If functions operate, fault
has been corrected.
(5) Set crane POWER switch to OFF
position.
(6) Set hydraulic selector switch to OFF
position.
(7) Turn OFF ENGINE switch.
2-481
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |