|
|
TM 9-2320-364-34-1
OPERATION TEST
(1) Operate LH outrigger using
LH O/R JACK control lever on LH
side of truck while holding RH O/R
JACK control lever in UP position
(TM 9-2320-364-10).
(a) If LH outrigger does not operate
with RH O/R JACK control lever
in UP position, perform Steps (2)
through (4) below and go to Step
6 of this Fault.
(b) If LH outrigger operates,
check valve in two valve bank
is faulty. Perform Steps (2)
through (4) below and repair two
valve bank (Para 16-28).
(2) Set crane POWER switch to OFF
position.
(3) Set hydraulic selector switch to OFF
position.
(4) Turn OFF ENGINE switch.
2-455
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |