|
|
TM 9-2320-364-34-1
VERIFY REPAIR
(1) Start engine (TM 9-2320-364-10).
(2) Set hydraulic selector switch to
AUTO position.
(3) Hold joystick in UNLOAD position and
then in LOAD position.
(a) If LHS does not operate,
fault not corrected. Perform
Steps (4) through (6) below and
notify supervisor.
(b) If LHS does operate, fault
has been corrected.
(4) Put LHS in transit position.
(5) Set hydraulic selector switch to OFF
position.
(6) Turn OFF ENGINE switch.
2-389
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |