 |
|||
|
|
|||
|
Page Title:
LOSS OF HOOK ARM LOAD HOLDING. (Cont) |
|
||
| ||||||||||
|
|
 TM 9-2320-364-34-1
5. LOSS OF HOOK ARM LOAD HOLDING (CONT).
High pressure hydraulics [oil under
3675 psi (25,339 kPa) pressure] operate
this equipment. Refer to vehicle operator
and maintenance manuals for hydraulic oil
pressure. Never disconnect any hydraulic
line or fitting without first dropping
pressure to zero. Failure to comply may
result in injury to personnel.
Fuel and oil are slippery and can cause
falls. To avoid injury, wipe up spilled
fuel or oil with rags.
Do not get under LHS when disconnecting or
connecting connectors or hoses. A hydraulic
malfunction could cause LHS to lower causing
serious injury.
FLOWMETER TEST (CONT).
(8) Connect adapter hose to middle
frame bulkhead.
(9) Connect flowmeter IN port to
adapter hose connected to hose
2881.
(10) Connect flowmeter OUT port to
adapter hose connected to middle
frame bulkhead.
(11) Completely open flowmeter load
valve.
(12) Connect quick disconnect
hose 2917.
(13) Start engine.
(14) Set hydraulic selector switch to
MAN HA position.
Continued on next page.
2-316
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals