TORQUE SEQUENCE -699581231

TM9-2320-363-20-2

TORQUE SEQUENCE

If the maintenance procedures in Chapter 4 do not specify a tightening order, use the following

guides:

Unless otherwise specified, lubricate threads of fasteners with oil (OE/HDO-10 or OEA).

When tightening fasteners above 30 Ib-ft (41 N.m), use the torque pattern but only tighten

to 70 percent of final value (multiply final value by 0.7); then repeat the pattern until final

value is reached.

Tighten circular patterns using the circular torque pattern, and straight patterns using the

straight torque pattern.

E-3/( E-4 Blank)