 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM9-2320-363-20-2
INSTALL MOUNTING BRACKET ASSEMBLY (1), FOUR WASHERS (2), FOUR NEW LOCK
1.
WASHERS (3), AND FOUR SCREWS (4) UNDER CAB (5).
WARNING
D i e s e l fuel is flammable. Do not work on fuel system in presence of sparks
or open flame. To do so could result in serious injury to personnel.
2.
CONNECT TWO CONNECTORS (6) TO WATER PUMP (7) AND FUEL PUMP (8).
INSTALL TWO SADDLES (9), HEATER ASSEMBLY (10)), TWO U-BOLTS (11), AND FOUR NEW
3.
LOCK NUTS (12) ON MOUNTING BRACKET ASSEMBLY (1).
4.
CONNECT FUEL HOSE (13) FROM HEATER ASSEMBLY (10) TO FUEL PUMP (8).
5.
CONNECT FUEL HOSE (14) AND TIGHTEN CLAMP (15) ON FUEL FILTER (16).
6.
CONNECT HOSE (17) FROM HEATER ASSEMBLY (10) TO WATER PUMP (7) AND TIGHTEN
CLAMP (18).
7.
CONNECT TWO HOSES (19) AND TIGHTEN TWO CLAMPS (20) ON HEATER ASSEMBLY (10) AND
WATER PUMP (7).
0.
INSTALL EXHAUST PIPE (21) AND SADDLE CLAMP (22) AND TIGHTEN TWO NUTS (23)
HAND-TIGHT.
9.
INSTALL BRACKET (24), WASHER (25), SCREW (26), AND NEW KEP NUT (27) ON BATTERY BOX
MOUNTING BRACKET (28).
10.
INSTALL CLAMP (29), WASHER (30), SCREW (31), AND NEW KEP NUT (32).
11.
TIGHTEN TWO NUTS (23) ON SADDLE CLAMP (22).
12.
REMOVE CAP (33) AND FILL TANK (34) WITH COOLANT TO WITHIN 1/2 IN. FROM NECK.
INSTALL CAP (33).
NOTE
Follow-on
Maintenance:
C o n n e c t batteries (page 2-29).
4-823
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals