ASSEMBLY (Cont) -699580964

TM 9-2320-363-20-2

SEAT ASSEMBLY REPAIR (CONT)

16.

REMOVE BLOCKING SUPPORTING UPPER PLATE (14).

17.

INSTALL KNOB (27) TO TILT ROD (28) AND INSTALL TWO BRACKETS (29) AND TILT ROD TO CHANNEL (30).

18.

INSTALL KNOB (31), NEW POP RIVET (32), DETENT PIN (33) AND SPRING (34) TO CONTROL HANDLE (35).

19.

INSTALL SHOULDER BOLT (36), WASHER (37), SPLIT POLY LOOM (38), SPRING (39), CONTROL HANDLE

(35) AND WASHER (40) WITH NEW LOCK NUT (41).

20.

CONNECT SPRING (42) AND SPLIT POLY LOOM (43) TO CHANNEL (30) AND POSITION CHANNEL TO UPPER

PLATE (14).

21.

INSTALL SCREW (44) TO LATCH BAR (45) AND INSTALL SPACER (46),LATCH BAR (45) AND PIVOT BLOCK

(47) TO CHANNEL (30) WITH WASHER (48) AND BOLT (49). TIGHTEN BOLT TO 26 TO 34 LB-FT (36 TO 46

N.m).

22.

CONNECT END OF SPRING (42) TO LATCH BAR (45).

23.

INSTALL TWO ROLLERS (50) TO EACH OF TWO GUIDE ASSEMBLIES (51).

24.

POSITION VALVE MOU NT (52) AND TWO GUIDE ASSEMBLIES (51) TO CHANNEL (30).

25.

INSTALL SIX NEW LOCK WASHERS (53) AND SCREWS (54) UNDERNEATH CHANNEL (30) AND SIX NEW

LOCK WASHERS (53) AND SCREWS (54) TO SIDES OF CHANNEL.

26.

SECURE AIR LINES (26) WITH THREE WIRE TIES (55).

27.

ADJUST CHANNEL (30) ASSEMBLY TO FORWARD POSITION AND INSTALL FRONT ISOLATOR SPRING (56)

AND RUBBER BUMPER (57).

28.

ADJUST CHANNEL (30) ASSEMBLY TO REAR POSITION AND INSTALL REAR ISOLATOR SPRING (56) AND

RUBBER BUMPER (57).

4-695.8 Change 3