DISASSEMBLY (Cont) -699580958

TM 9-2320-363-20-2

SEAT ASSEMBLY REPAIR (CONT)

10.

WITH CHANNEL (4) ASSEMBLY STILL IN REAR POSITION, REMOVE ISOLATOR SPRING (28) AND RUBBER

BUMPER (29) AT REAR.

11.

ADJUST CHANNEL (4) ASSEMBLY TO FORWARD POSITION AND REMOVE ISOLATOR SPRING (28) AND

RUBBER BUMPER (29) AT FRONT.

12.

REMOVE THREE WIRE TIES (30) FROM AIR LINES (31).

13.

REMOVE SIX SCREWS (32) AND LOCK WASHERS (33) FROM SIDES OF CHANNEL (4) AND SIX SCREWS (32)

AND LOCK WASHERS (33) FROM UNDERNEATH CHANNEL TO FREE TWO GUIDE ASSEMBLIES (34).

DISCARD LOCK WASHERS.

14.

REMOVE TWO GUIDE ASSEMBLIES (34) AND VALVE MOUNT (35) FROM CHANNEL (4).

15.

REMOVE TWO ROLLERS (36) FROM EACH GUIDE ASSEMBLY (34).

16.

DISCONNECT END OF SPRING (37) FROM LATCH BAR (38).

17.

REMOVE BOLT (39), WASHER (40), PIVOT BLOCK (41), LATCH BAR (38) AND SPACER (42) FROM CHANNEL

(4). REMOVE SCREW (43) FROM LATCH BAR.

18.

SEPARATE CHANNEL (4) FROM UPPER PLATE (8) AND DISCONNECT SPRING (37) AND SPLIT POLY LOOM

(44) FROM CHANNEL.

19.

REMOVE LOCK NUT (45), WASHER (46), CONTROL HANDLE (47), SPRING (48), SPLIT POLY LOOM (49),

WASHER (50) AND SHOULDER BOLT (51) FROM CHANNEL (4). DISCARD LOCK NUT.

20.

REMOVE SPRING (52), DETENT PIN (53), POP RIVET (54) AND KNOB (55) FROM CONTROL HANDLE (47).

21.

REMOVE TWO BRACKETS (56) AND TILT ROD (57) FROM CHANNEL (4). REMOVE KNOB (58) FROM TILT

ROD.

4-695.2 Change 3