ADJUSTMENT (Cont) -699580928

TM 9-2320-363-20-2

HOOD ADJUSTMENT (CONT)

NOTE

P e r f o r m steps 16 thru 24 only if all shims have been removed and seam is still

n o t in alinement.

16.

REMOVE LOCK NUT (5), WASHER (9), BOLT (10), AND LOCATOR (11). DISCARD LOCK NUT.

17.

REMOVE FOUR LOCK NUTS (4), FOUR WASHERS (12), AND FOUR SCREWS (13). DISCARD

LOCK NUTS.

18.

REMOVE HOOD GUIDE (14) FROM UNDER LOCATOR BRACKET (15). INSTALL HOOD GUIDE (14)

ON TOP OF LOCATOR BRACKET (15).

19.

INSTALL FOUR SCREWS (13), FOUR WASHERS (12), AND FOUR NEW LOCK NUTS (4) JUST

TIGHT ENOUGH TO ALLOW FORWARD OR BACKWARD ADJUSTMENT.

20.

INSTALL LOCATOR (11), BOLT (10), WASHER (9), AND NEW LOCK NUT (5). TIGHTEN LOCK NUT

(5) JUST TIGHT ENOUGH TO ALLOW FOR INSTALLATION OF SHIMS (8).

21.

REPEAT STEPS 12 THRU 15 UNTIL SEAM ALINEMENT IS ATTAlNED.

22.

T I G H T E N LOCK NUT (5) JUST ENOUGH TO ALLOW SIDE-TO-SIDE MOVEMENT FOR

ADJUSTMENT.

23.

REPEAT STEPS 13 THRU 22 FOR OPPOSITE SIDE, IF NECESSARY.

24.

REPEAT STEPS 9 AND 10.

4-668