 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
INSTALLATION
NOTE
Procedure is the same for all air tubes.
1.
INSTALL NUT (1), FERRULE (5), AND INSERT (4) ON AIR TUBE (3)
CAUTION
Route air tubes so that tube does not bend to radius smaller than allowed in Nylon
Tube Bend Radius Table. If bent smaller than allowed, tube may kink causing loss
of air pressure.
NOTE
Apply a thin coat of thread sealing compound on male threads of fittings
2.
INSTALL NUT (1) ON FITTING (2).
Nylon Tube Bend Radius Table
Outside Diameter
Minimum Bend Radius
in.
(mm)
in.
(mm)
0.25
(6.40)
1.0
(25.0)
0.38
(9.50)
1.5
(38 0)
0.50
(13 00)
2.0
(51.0)
0.63
(17.00)
2.5
(64.0)
0.75
(19.00)
3.0
(76.0)
NOTE
Follow-on Maintenance:
Start vehicle and perform standard leak test (page 2-24).
Change 3 4-604.31/(4-604.32 Blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals