 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
CTIS WHEEL VALVE AND HOSE REPLACEMENT, REAR (CONT)
INSTALLATION
1.
INSTALL NEW AIR FILTER (1) WITH OPEN END OUT IN WHEEL VALVE (2).
2.
INSTALL MOUNTING PLATE (3) AND TWO HUB NUTS (4).
3.
TORQUE HUB NUTS TO 155 LB-FT (210 N.m).
4.
POSITION WHEEL VALVE (2) ON MOUNTING PLATE (3) AND INSTALL TWO SCREWS (5), TWO SPACERS (6),
TWO NEW LOCK WASHERS (7), AND TWO NUTS (8).
WARNING
Make sure all air lines and fittings are clear of debris. Make sure excess pipe
sealant compound does not enter air lines or fittings. Failure to do so could
result in equipment failure and/or injury to personnel.
Sealant compounds can bum easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or death, keep away from open
fire and use in a well-ventilated area. If sealant compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Apply thin coat of sealing compound to all male threads.
5.
INSTALL WHEEL VALVE CONNECTOR (9) ON WHEEL VALVE (2).
6.
INSTALL WHEEL VALVE CONNECTOR (10) ON WHEEL VALVE (2).
7.
INSTALL HUB AIR PORT CONNECTOR (11) ON HUB AIR PORT (12).
4-604.22 Change 3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals