INSTALLATION -699580848

TM 9-2320-363-20-2

CTIS WHEEL VALVE AND HOSE ASSEMBLY REPLACEMENT, FRONT

(CONT)

INSTALLATION

INSTALL NEW AIR FILTER (1) WITH OPEN END OUT IN WHEEL VALVE (2).

INSTALL TWO SPACERS (3), WHEEL VALVE (2), TWO NEW LOCK WASHERS (4), AND TWO SCREWS (5).

WARNING

Make sure all air lines and fittings are clear of debris. Make sure excess pipe

sealant compound does not enter air lines or fittings. Failure to do so could

result in equipment failure and/or injury to personnel.

Sealant compounds can bum easily, can give off harmful vapors, and are

harmful to skin and clothing. To avoid injury or death, keep away from open

fire and use in a well-ventilated area. If sealant compound gets on skin or

clothing, wash immediately with soap and water.

NOTE

Apply thin coat of sealing compound to all male threads.

INSTALL WHEEL VALVE CONNECTOR (6) ON WHEEL VALVE (2).

CONNECT ONE END OF HOSE (7) TO WHEEL VALVE CONNECTOR (6).

4-604.18 Change 3