 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-363-20-2
3.
REMOVE BRAKE DRUM (4) FROM HUB (5).
NOTE
P l a c e suitable container under hub opening to catch axle oil.
4.
REMOVE SIX CAPSCREWS (6), SIX LOCK WASHERS (7), HUB CAP (8), AND GASKET (9).
DISCARD GASKET AND LOCK WASHERS.
BEND BACK TAB ON LOCK WASHER (10).
5.
6.
REMOVE JAM NUT (1 1), LOCK WASHER (10), LOCK RING (12), AND ADJUSTING NUT (13) FROM
AXLE SPINDLE (14). DISCARD LOCK WASHER.
7.
REMOVE OUTSIDE WHEEL BEARING (15) FROM AXLE SPINDLE (14). OUTER BEARING RACE
(16) WILL REMAIN IN BORE OF HUB (5).
8.
REMOVE HUB (5) FROM AXLE SPINDLE (14).
9.
REMOVE OIL SEAL (17) AND INSIDE WHEEL BEARING (18) FROM HUB (5). DISCARD OIL SEAL,
NOTE
P e r f o r m step 10 if bearing races are damaged or if installing new bearings (15
and 18).
10.
REMOVE INNER BEARING RACE (19) AND OUTER BEARING RACE (16) FROM BORE OF HUB
(5).
4-585
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals